PetSafe Happy Ride Foldable Dog Car Ramp

The Pet Ramp should come packaged with the safety locking
strap engaged (on side of ramp, see image). To disengage,
pull on the finger tab which will remove the bulb end from
the opposite ramp piece.

To use the Pet Ramp, simply unfold into a straight shape, set
the angled, upper end (with the “Solvit” logo) on the surface
to which the pet is trying to climb (car, couch, etc.), and set
the angled, lower surface on the ground. When finished,
simply fold the ramp into the closed position, engage the
safety locking strap, and stow in a convenient place.

It is important to make sure the rubber feet on the upper and lower ends of the ramp are resting firmly on a
stable surface (car bumper, sidewalk, etc.) before using. If the rubber feet are not in contact, the ramp could
shift during use.

Please note when the safety locking strap is not engaged, it is possible for the ramp to swing open
unintentionally. Always engage the locking strap when the ramp is not in use.

Training: Many pets will begin using the Pet Ramp with no hesitation. If your pet is unsure at first, lay the
Ramp flat on the ground and allow your pet to become comfortable walking on it before using it in an
inclined position. It also helps to hold your pet by the collar and offer reassuring praise and/or treats as your
pet gains confidence using the Ramp. For vehicle use, command your pet to stay inside the vehicle until the
Ramp is deployed, then walk your pet down safely.

If the plastic parts of the Pet Ramp become dirty, simply clean with any standard
household cleaner. The tread material can be cleaned with mild detergent and a stiff brush, or a strong jet of
water. The Ramp should be maintenance-free. If a problem occurs, please contact Customer Service below.